Skip to main content
SaleUse code ZEN for an extra 10% off
Feature Zens
Home>Docs>Start here

Connection Guides

These are the official-style steps to connect your Cronus Zen to your console or PC. If you skip a step, your controller can disconnect.

Source: Official Cronus Connection Guide

PlayStation 5

Because Sony blocks third-party devices, you must use the Zen Link Wi-Fi Module or the USB Bypass method. We strongly recommend the Zen Link.

Read the full PS5 setup guide here

Xbox (All Models)

Xbox is plug-and-play. You do not need a bypass.

  1. 1Plug the short micro-USB cable into the top CONSOLE port of the Zen, and plug the other end into your Xbox.
  2. 2Plug your Xbox controller into the left A1 port of the Zen using a high-quality data USB cable.
  3. 3Make sure your Zen Studio “Emulator Output Protocol” is set to Xbox One X/S or AUTO.

Xbox Headset Fix

If your headset does not work when plugged into your Xbox controller, you may need to downgrade your Zen firmware to version 2.0.9-beta.43.

Firmware Guide

PC

Connecting to a PC is simple. Your PC will usually read the Zen as a normal Xbox controller.

  1. 1Plug the short micro-USB cable into the top CONSOLE port of the Zen, and plug the other end into your PC.
  2. 2Plug your controller into the left A1 port of the Zen.
  3. 3Make sure your Zen Studio “Emulator Output Protocol” is set to Xbox 360. This gives you the best compatibility with PC games.

Top 3 Mistakes Everyone Makes

  • Leaving the PROG cable plugged in: The right-side PROG cable is only for Zen Studio. If you leave it plugged into your PC while trying to play a game, your controller can disconnect.
  • Using a cheap charge-only cable: The cables that come with the Zen can break easily. If your controller turns on but does not do anything, your cable may be the issue. Use a data-sync micro-USB or USB-C cable.
  • Using a USB hub: Always plug the Zen directly into your console or PC. Do not use a USB hub or extension cable.